neville wrote:Hi Andy,
Thanks for the quick reply,
1. The ESJFS welcome msge did come up in ES.
2 Noted. I did not haveusername/nickname the same, now done
Thanks for your screenshot, my debug button does nothing
I got the metar to display in ES and fired up the voice ATIS ok, but it would only activate the text.
Not able to try for an A/C, nobody about.
hopefully screenshot attached
1. If you get the message you are all working and connected, great.
2.Username/Nickname shouldn't matter, I think this will be a coincidence that it worked when they were set the same.
The callsign in Euroscope is important.
The first 4 characters MUST be the ICAO code for the airfield you are controlling.
The Debug button will only work if you click it after ESJFS has opened and before you connect Euroscope.
It was an after thought which I'll correct when I get around to a rewrite.
As you are not connected to an FSD server (like vatsim) you will notice features missing.
The voice services in Euroscope are for the VATSIM Voice servers And so will not work whilst viewing JoinFS traffic.
Although I told it to get the latest real world METAR, It will only get the METAR for your airport ( hence the callsign importance).
You won't be able to coordinate with other controllers through Euroscope and certain information will be missing from flight plans.
But the information it does show will be the latest and correct.
If you tick Global whazzup in JoinFS you will see all users.
Although those users not on the same hub as you will not update at the right interval to be controlled.
In other words they update around every 60seconds where as users on the same hub as you update around every 3-4 seconds to make for a realistic radar sweep.
Hope that helps.