FS Join Bandwith Usage

Suggestions, ideas and general discussion about JoinFS.
Blackbeard
Posts: 8
Joined: Fri Oct 28, 2016 5:45 pm

FS Join Bandwith Usage

Postby Blackbeard » Thu Dec 01, 2016 8:21 am

Hi Peter,

Firstly a big thank you for joining our Trojan Aerobatic Team for a session last Sunday. Your input was greatly appreciated.

A further problem we seem to be experiencing is bandwith usage. Unfortunately some parts of the world still charge data usage per meg. I realise that there is an option for low bandwidth, but use of this tends to exacerbate the jumping problem.

Using a bandwith monitor I've compared an average 1 hour Join FS session with a Multiplayer session of the same length. Join FS seems to consume more than 4 times the data. Would a fix for this issue be possible in the future?

User avatar
Peter
Site Admin
Posts: 1459
Joined: Fri Sep 23, 2016 8:51 am

Re: FS Join Bandwith Usage

Postby Peter » Thu Dec 01, 2016 9:33 am

Hi,

There's a change that I'll be making in 1.0.18 which will reduce the bandwidth a bit. I doubt I'll be able to reduce it to a quarter though. I appreciate that some are on bandwidth tariffs but I wouldn't say that JoinFS is bandwidth hungry. With my internet connection here, JoinFS barely uses 1% of it. I think the low bandwidth option is your best bet, but obviously comes at the price of not being quite as smooth.

Best regards,
Peter

User avatar
Peter
Site Admin
Posts: 1459
Joined: Fri Sep 23, 2016 8:51 am

Re: FS Join Bandwith Usage

Postby Peter » Thu Dec 01, 2016 12:51 pm

Just wondering, when you measured the bandwidth did you take into account any Teamspeak usage?

Peter

Robert
Posts: 34
Joined: Mon Oct 10, 2016 12:28 am

Re: FS Join Bandwith Usage

Postby Robert » Thu Dec 01, 2016 2:50 pm

Hey Peter, one request on reducing bandwidth - if there is any way it could reduce accuracy in multiplayer close formation multiplayer flying or recording, it would be really good to make that an option.

And the TeamSpeak angle is a good one. When we did a big multiplayer flight a while back, there were times when lots of people were talking that things would also get jumpy. No measurements to quantify what was going on but just qualitatively, TeamSpeak can add at least some load.

Blackbeard
Posts: 8
Joined: Fri Oct 28, 2016 5:45 pm

Re: FS Join Bandwith Usage

Postby Blackbeard » Mon Dec 05, 2016 6:06 am

Yes, I have definitely taken Teamspeak into account. My findings are based upon at least 5 sessions of each connection method i.e. Join FS and Multiplayer, all running Teamspeak as well. In last night's Trojan session we split it in two, first half Join FS, second Multiplayer. We were using ver 17, but we had aircraft pirouetting on the ground, and some disappearing. Again, when changing back to Multiplayer, the data usage dropped significantly.

Peter, 1% to you might equal 20% to others.

Our counterparts over at CIX running only 4 aircraft and all users based in the UK had no problems at all. We were running 6 aircraft with users in the States, UK, and South Africa.

User avatar
Peter
Site Admin
Posts: 1459
Joined: Fri Sep 23, 2016 8:51 am

Re: FS Join Bandwith Usage

Postby Peter » Mon Dec 05, 2016 9:12 am

Version 1.0.18 is out today and has some improvements on bandwidth consumption. I'll make further optimizations in due course.

It could be that FSX multiplayer sends less frequent updates, in which case they are never going to be equivalent I'm afraid. Fortunately, bandwidth has improved significantly since FSX launched over ten years ago.

Thanks,
Peter

FireRx
Posts: 22
Joined: Mon Dec 05, 2016 11:57 am

Re: FS Join Bandwith Usage

Postby FireRx » Mon Dec 05, 2016 12:02 pm

where can we download 1.0.18? :)


Return to “Discussion”