errors in log after connect to hubs?

Suggestions, ideas and general discussion about JoinFS.
SuperCrash
Posts: 1
Joined: Thu Jul 19, 2018 3:53 am

errors in log after connect to hubs?

Postby SuperCrash » Thu Jul 19, 2018 4:36 am

completely new here... first 2 connect I did to night ended with the same errors. Not sure if I was ever on the network. It seemed to connect, but I get these stream errors. Normal? My log is below if someone can make sense of it. It seems to be connecting but the peer connections seem to fail. I did setup port forwarding on my router and assume since it is establishing a connection that at least that is working :)

I did not see the hub user count go up after I connected like I would have expected. so my assumption is something failed. Any hints or tricks to debug connections. I am using the latest joinFS installation with FSX & SP2 installed


18/07/2018 23:28:54.486 Joining network
18/07/2018 23:28:54.584 Connected to network
18/07/2018 23:28:54.584 Added user 802
18/07/2018 23:28:54.585 Added user 13783
18/07/2018 23:28:54.585 Added user 18868
18/07/2018 23:28:54.585 Added user 30306
18/07/2018 23:28:54.631 Listing aircraft : User=13783, Model=C185F SKYWAGON AMPHIBIAN
18/07/2018 23:28:54.714 Connection established 13783
18/07/2018 23:28:54.744 Added user 43747
18/07/2018 23:28:54.744 Connection established 18868
18/07/2018 23:28:54.793 Listing aircraft ZK-ART : User=802, Model=Grumman Goose G21A paint2
18/07/2018 23:28:54.798 Connection established 802
18/07/2018 23:28:54.817 Listing aircraft N2429R : User=30306, Model=Soloy MK2 Float Transport N2429R
18/07/2018 23:28:54.817 Connection established 30306
18/07/2018 23:28:54.827 Connection established 43747
18/07/2018 23:29:20.381 Node failed to read message: 3 Unable to read beyond the end of the stream.
18/07/2018 23:29:27.486 Node failed to read message: 3 Unable to read beyond the end of the stream.

Return to “Discussion”