SIMCOM X Voice application

Suggestions, ideas and general discussion about JoinFS.
edakridge
Posts: 74
Joined: Thu Dec 15, 2016 12:30 am

Re: SIMCOM X Voice application

Postby edakridge » Sat Aug 11, 2018 10:49 am

Roo, the new version definitely loads quicker, but it seems to be unable to connect to the sim. The sim light stays red and I am unable to select FSUIPC in the config.

ATC Roo
Posts: 335
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Sat Aug 11, 2018 4:05 pm

Yup FSUIPC is not implemented yet.

I'll have a look at the non connection to the SIM.

There is also a problem when using a joystick button as a ptt with that version.
If it loads with a Jostick PTT remembered, it will work back to front.
Setting a new button will correct it.
Will be fixed in the next version.

You should be able to speak to others though?

edakridge
Posts: 74
Joined: Thu Dec 15, 2016 12:30 am

Re: SIMCOM X Voice application

Postby edakridge » Sun Aug 12, 2018 11:14 am

Only testing with one other person. No sound yet. I think the problem is on his end (Windows 10).

ATC Roo
Posts: 335
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Mon Aug 13, 2018 6:02 pm

Sound should definitely work.
Check that the sound card SIMCOM reports when it loads up is correct.

I stopped it talking to the SIM if the box was ticked and it didn't detect it.

So having the SIM running first might help.
Else I'll be looking over that part of the code shortly when I write the FSUIPC part of the project.

A simple test is both have SIMCOM X ticked.
Both tune to the same freq manually.
If one of you ticks the ATC box then you'd show in the ATC section too.

I know I have a few things to iron out, but it should be useable at the moment.


Return to “Discussion”