SIMCOM X Voice application

Suggestions, ideas and general discussion about JoinFS.
ATC Roo
Posts: 380
Joined: Sun Oct 16, 2016 9:24 am
Location: UK
Contact:

SIMCOM X Voice application

Postby ATC Roo » Mon Mar 26, 2018 8:44 pm

Here we go then!

Image

Download here!

I've created a voice app which I've named SIMCOM X.
More information on the app can be found at https://dotdash.space/scx.

This came about as I could see pilots from other groups fly past, but I had no way to contact them.
I also knew of ATC who were sat twiddling their thumbs with one group, while another group were begging for a controller.

Simcom X is built to run alongside existing voice apps.

So if your group uses Teamspeak or Discord you are able to also run Simcom X to connect to the SCX network and then tune to the same frequency as pilots or ATC from other groups should you wish to.

FEATURES
Audio based on distance.
The closer you are to another station, the better the Audio quality. Too far away and you won't hear them at all.
Auto Switch frequencies.
When the aircraft radio stack is tuned in FSX/P3D (SimConnect) or XPLANE and FS9 (XPUIPC/FSUIPC), you will automatically move to that frequency in SCX.
Can ALSO be used without autoswitching.
Can be used as standalone with no sim running.
Can be used while existing voice apps are running.
For example chat to your friends on Discord/TS3 whilst communicating with ATC and other pilots on SCX.
Two different modes.
SCX Network and Group Mode.
If using Group mode, give your friends the IP displayed in your client which they can input to connect to you.
If using SCX mode, the client will look for other clients on the same frequency and then connect to them automatically.
SCX mode will also show which ATC is online using Simcom X and what frequency you can contact them on.
Play a sound on Frequency switch.
So you can run the app in the background and know you have switched.
Play a sound on TX or RX.
This might help people to stop talking over each other.
15 second TX Timeout.
This helps those that get the occasional stuck PTT issues.
Able to mute any other client on the same frequency.
Helps to stop the music players.
The icon on the taskbar will light up when TX or RX
Helps you to see if you are transmitting or receiving when the app is minimised.
You may need to show hidden icons or set the icon to always show in your Taskbar.
XPlane/FS9 XPUIPC/FSUIPC support.
Checks for updates on start-up.


To come..
Test if your port is open correctly/firewall issues.
Specific ATC client to allow coordination between controllers.


I've posted it here so that people can try it and let me know the bugs.
This is the first version, its BETA, THERE WILL BE BUGS.

How to use it....
P3Dv4 users will need to install the Simconnect version in the XPACK folder.

Thelatest 4.72 .net runtime may also be needed by some people.

1. Run the installer so it's installed (always a good start).
2. OPEN UDP PORT 9988 in your router/firewalls, so clients can connect to each other.
3. Click the black headset icon on the desktop to open.
On first run, Windows will ask if you want to add a firewall exception. You do, otherwise others can't connect to you.
4. Once opened hit the config button and select the sounds, network etc that you would like to use.
If you are acting as An ATCO, select the ATC box and you will show on the list in SCX mode.

Once configured and PTT is set click the PWR button on the bottom left.
Green is ON.
Red is OFF.

What it SHOULD DO!
I'd be grateful if people could test and report the issues.

When Join Group Server is selected you should be able to enter an IP into the Text Box and connect to another person who you know is also using Simcom X (The Group mode feature).

If you select the Host Group Server box, you are the host and it will show your IP in the Text Box above.
You can then give this to others so that they can connect to you.
Only one person (the host) in the group needs to have the Host Group Server box selected.
The other users should have the Join Group Server box selected and input the IP of the host to connect.

If SIMCOM X Mode is selected.
When the frequency is changed in the Active Freq box, it should look for and connect to others on that freq who also have the SIMCOM X box selected.
If the Simcom X box is selected and ATC mode is ticked, you should show in the ATC box on the main screen after a few minutes.

If you are not using the autoswitch feature, you can tune the standby box and click the arrow to make the frequency active.

It should only allow frequencies to be entered correctly.
6 digits with a decimal place.
ie 123.450 not 123.45, 123450 or 24.45

If you do try the autoswitch feature you should no longer be able to press the button from standby to active and you should switch frequencies as they are made active in your flight sim.
Both COM1 and COM2 radios are supported, which ever is your ACTIVE TX box in the sim will be the frequency Simcom X uses.


Callsigns for pilots should be either a registration (ie GABCD or N1234M) or callsign with a trigraph (ie BAW123 OR AAL123) which helps ATC, although there is nothing to stop you using your name (Bob etc).

ATC should set their callsign as the ICAO_POS (KLAX_TWR for example).
As the ATC callsign shows in the ATC box and pilots can see the airport and position active.
If you set Bob, nobody will know where you are controlling.


AWAITING THE BUG LIST..............
Let me know how it works for you and if you think its of any use.
Last edited by ATC Roo on Sun Nov 11, 2018 2:18 pm, edited 15 times in total.

ATC Roo
Posts: 380
Joined: Sun Oct 16, 2016 9:24 am
Location: UK
Contact:

Re: SIMCOMX Voice application

Postby ATC Roo » Tue Mar 27, 2018 4:02 pm

I found an issue already.
So pulled it before everybody installed the issue. :)
I'll post the correct version shortly.
Last edited by ATC Roo on Sun Nov 11, 2018 2:18 pm, edited 2 times in total.

ATC Roo
Posts: 380
Joined: Sun Oct 16, 2016 9:24 am
Location: UK
Contact:

Re: SIMCOMX Voice application

Postby ATC Roo » Thu Mar 29, 2018 11:30 am

I've updated the first post.

If you have the time and like the look of the app, please do try it and let me know.

If I don't know of issues I can't fix them.
If I don't know there are no issues I'll keep looking for them.

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOMX Voice application

Postby oldpop » Fri Mar 30, 2018 3:05 pm

installed program. all looks good. started P3DV4 in MP, then comm program. see pic. can't get the "sim" light to turn green!
Attachments
ingam.jpg
ingam.jpg (143.65 KiB) Viewed 2378 times

ATC Roo
Posts: 380
Joined: Sun Oct 16, 2016 9:24 am
Location: UK
Contact:

Re: SIMCOMX Voice application

Postby ATC Roo » Fri Mar 30, 2018 3:46 pm

Thanks pop.

I'll take a look shortly.

I see you've set a Joystick/gamepad button for the ptt.
Does that work ok?

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOMX Voice application

Postby oldpop » Fri Mar 30, 2018 8:08 pm

I see the "TX" light come on and hear the mic click, bot to voice in or out. Also the mick click i coming through my speakers, I would want the comms via my headset. :D

ATC Roo
Posts: 380
Joined: Sun Oct 16, 2016 9:24 am
Location: UK
Contact:

Re: SIMCOMX Voice application

Postby ATC Roo » Fri Mar 30, 2018 8:21 pm

oldpop wrote:I see the "TX" light come on and hear the mic click, bot to voice in or out. Also the mick click i coming through my speakers, I would want the comms via my headset. :D


I've only been able to test with a 2.5mm Jack headset, which is what I have.
Are you using a usb headset?

If you haven't already, try having the headset plugged in before starting the app.
I should be able to add a drop down menu to the config page in order to select sound device otherwise.

Let me get the auto switch back up and running and I'll have a look.

ATC Roo
Posts: 380
Joined: Sun Oct 16, 2016 9:24 am
Location: UK
Contact:

Re: SIMCOMX Voice application

Postby ATC Roo » Sat Mar 31, 2018 3:49 pm

Autoswitch should now be fixed!

Switch with FSX/P3D when the autoswitch box is selected.

Download link for the new version is the same.
Run the new installer and it will update the last version.

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOMX Voice application

Postby oldpop » Tue Apr 03, 2018 5:47 pm

Getting better!Autoswitch works. When I am hosting (MY IP IN IP BOX), in sim(p3dV4), TS3 running, all lights green, freq displaying as in a/c, can hear "clicks"(on speaker) all looks good, but don't see other member on line, nor can he hear me, or I him(tx light ok).
I don't see him in left window. he has my IP in and on same freq.
site will not allow me to att the log files in any format???

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOMX Voice application

Postby oldpop » Tue Apr 03, 2018 5:48 pm

removed
Last edited by oldpop on Wed Apr 04, 2018 3:36 pm, edited 1 time in total.


Return to “Discussion”