SIMCOM X Voice application

Suggestions, ideas and general discussion about JoinFS.
ATC Roo
Posts: 283
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Sat Apr 14, 2018 12:35 pm

Grumpy wrote:
Thank you Roo.
I shall keep a watch out for that release.
Bob.


Its the latest version that is available now Grumpy.

Download from Here!

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOM X Voice application

Postby oldpop » Mon Apr 16, 2018 2:16 am

Roo, what is the latest version? Please number them so we can tell if we all have the latest.
five players in P3DV4 last night, all got it working !!! ;)

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOM X Voice application

Postby oldpop » Mon Apr 16, 2018 1:47 pm

open sim(P3Dv4), open SimcomX, turn on, check config, set ppt. use PPT "tx" come on and remains on. Must shut sown SimComX, and re select ppt to get it to work.

ATC Roo
Posts: 283
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Mon Apr 16, 2018 2:24 pm

What happens if you wait for 11 seconds?

The joystick PTT should be resolved in the latest version.
Keyboard PTT should have been working anyway.

The Version number should be on the config page.
0.0.10.0 is the latest Version.

Let me know.. :?

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOM X Voice application

Postby oldpop » Wed Apr 18, 2018 12:35 pm

don't see ver #???
TX stays on long after /0 sec on this install. Will redownload and install again
Attachments
sc.jpg
sc.jpg (75.29 KiB) Viewed 56 times

ATC Roo
Posts: 283
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Wed Apr 18, 2018 4:45 pm

Yup,

That's an older version.
The latest version will have the version number in the config and you will be able to mute people by double clicking on the client window.
If it helps I'm not planning on releasing a newer version for a while to see how this one stands up.

If it's good then it will become the first stable version.

That IPV6 address is annoying isn't it.
I'll see what I can do about that too.

oldpop
Posts: 14
Joined: Fri Mar 30, 2018 2:55 pm

Re: SIMCOM X Voice application

Postby oldpop » Thu Apr 19, 2018 1:45 pm

downloaded the "msi" above,(over the last one---no uninstall). got error (scx1 att). Still had icon on DT,(scx2). I assume that is still the older ver.
Attachments
sacx2.jpg
sacx2.jpg (103.56 KiB) Viewed 43 times
scx1.jpg
scx1.jpg (51.31 KiB) Viewed 43 times

ATC Roo
Posts: 283
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Thu Apr 19, 2018 2:40 pm

Looks like you've still got the version that had the bug pop.

A couple of posts back I described how to uninstall it.

Add a file called hidden.vbs
Remove it from add and remove programs.
Install the latest version.

Let me know

sgraypgh
Posts: 23
Joined: Thu Jan 05, 2017 7:28 pm
Contact:

Re: SIMCOM X Voice application

Postby sgraypgh » Fri Apr 20, 2018 11:49 am

as an FYI - I had the same install and uninstall error. The only solution I found was to create the blank hidden.vbs file and then I was able to uninstall and then install the latest version. Might be worth just putting the file back into the installer to eliminate that issue.

ATC Roo
Posts: 283
Joined: Sun Oct 16, 2016 9:24 am

Re: SIMCOM X Voice application

Postby ATC Roo » Fri Apr 20, 2018 3:04 pm

sgraypgh wrote:as an FYI - I had the same install and uninstall error. The only solution I found was to create the blank hidden.vbs file and then I was able to uninstall and then install the latest version. Might be worth just putting the file back into the installer to eliminate that issue.


Ah wouldn't work I'm afraid.
I told the uninstaller in the version before the problem child to run the hidden.vbs script.
In the problem version I only removed the hidden.vbs script and either having a FICK moment or being slightly tired, I didnt remove the command to run that script on uninstall.

So when it tries to uninstall it looks for hidden.vbs, doesn't find it so can't continue.

The version needs to uninstall before it can install the new version.

I could write a program to add the hidden.vbs file, but that would be overkill when it can just be created with a right click.
The command to run that file is not in any newer version so won't happen again, it's just that one version.


Return to “Discussion”