Join FS - Aircraft Distance

Any questions regarding JoinFS.
Juergen2
Posts: 19
Joined: Wed Jan 18, 2017 5:40 pm

Join FS - Aircraft Distance

Postby Juergen2 » Tue Nov 28, 2017 11:19 am

Hi,
I have a general question:
I had a situation with a particular aircraft, when I selected:
VIEW>AIRCRAFT and looked at DISTANCE and it was displayed in RED.
What does the color RED mean??
Obviously I could NOT see that particular aircraft.
Thanks fore help
Juergen Mader

User avatar
Peter
Site Admin
Posts: 1285
Joined: Fri Sep 23, 2016 8:51 am

Re: Join FS - Aircraft Distance

Postby Peter » Tue Nov 28, 2017 11:57 am

Hi Juergen,

The colour represents the injection status and red means that for some reason the aircraft failed to be injected into the simulator. As you probably know, green means successfully injected, amber means that the aircraft is beyond the activity circle or for some other valid reason and has been removed.

If it's red, then look at the monitor window and there should be an indication of why it failed. If you think the model should have been ok then post it as a bug as there might be a problem somewhere.

Peter

Juergen2
Posts: 19
Joined: Wed Jan 18, 2017 5:40 pm

Re: Join FS - Aircraft Distance

Postby Juergen2 » Tue Nov 28, 2017 1:41 pm

Peter,
We did some testing after the flight and found the following:
This particular aircraft will always show RED in "Distance" and I can NOT see it in my simulator. We tried other aircraft and they worked fine. So no big deal "we'll send it back for warranty repairs"!!!!!!!
Again, thanks alot for the prompt response and help
Juergen


Return to “Queries”